Precautions for installation and use of cable waterproof connector
by:AAA
2020-04-02
The cable waterproof joint can be applied to the environment with water to provide a safe and reliable connector joint, the most important of which is to achieve the waterproof effect, so what should be paid attention to during the installation and use of the cable waterproof connector?
1, according to the needs of the cable connector model specifications to choose the appropriate joint material, now the cable joint material quality is uneven, but in order to ensure the quality of the cable joint, it is recommended not to covet cheap, it is best to choose the materials of cable joint manufacturers with reliable quality.
2, the cable joint is best not to choose rainy days, because the cable water will seriously affect the service life of the cable, serious and even short-circuit accidents.
3. Be sure to read the manufacturer's product manual carefully before making the cable waterproof joint. This is especially important for 10kV and above cables. Think about all the processes before doing it. Cable 315 network www. Xianlan315.
Com 4. For the terminal joints of single-core armored cables above 10kV, remember that only one end of the steel strip can be grounded.
5. The copper tube should not be pressed too hard, as long as the crimping is in place, the copper end face after the crimping is bound to have many convex starting points. This must be flattened with a file, and no burrs can be left.
6, Heat Shrinkable cable connector in the use of the blowtorch, pay attention to the blowtorch back and forth movement, can not only face a direction to continue to blow the lamp.
7. The size of the Cold shrink cable connector must be strictly in accordance with the drawings, especially when drawing out the support in the reserved tube, it is more careful.
Custom message