Five aspects of high temperature wire and cable export

At present, many domestic high-temperature wire and cable enterprises have entered the foreign market, but compared with foreign local products, the competitiveness of China's high-temperature wire and cable products still needs to be improved, in particular, some enterprises act rashly without understanding foreign industry standards, resulting in an embarrassing situation for their development. As a well-known brand in the high-temperature wire and cable industry, Chuncao has achieved certain results in the foreign market. Here are five aspects that should be paid attention to when exporting high-temperature wire and cable. I. Technical standards: foreign high-temperature wires and cables generally require IEC or advanced standards such as British standard and American Standard, so it is not enough to be familiar with domestic standards, but also with international standards. II. Laying conditions: the environmental conditions in West Asia, Southeast Asia and other regions are relatively special, such as the extreme maximum temperature of 50℃ and the highest daily average temperature of 40℃ in some regions, therefore, the technical data should pay attention to the description of technical parameters related to the environment (Such as the correction coefficient of current carrying capacity). Third, the high-temperature wire and cable structure: due to the high-temperature wire and cable laying environment, the high-temperature wire structure in addition to meeting the standard requirements, often there are some additional requirements, for this reason, enterprises should pay attention to the design and manufacture of high-temperature lines. 4. Packaging of high-temperature wires and cables: for exported high-temperature wires and cables, the delivery plate generally adopts the structure of large plate or steel plate, and is fully enclosed with iron sheet or wooden strip. In addition to considering the high-temperature line loading length and the minimum allowable bending radius, the size of the container should also be considered. We must strictly follow the order requirements. Since the packaging of export high-temperature lines is more complicated than that of domestic ones, it will affect the cost and delivery time of high-temperature lines. Therefore, attention should be paid to the contract. V. Other precautions: before shipment, users should be provided with the main technical parameters, cross-section drawings, laying instructions and other materials of high-temperature wires and cables, and the test report should also be shipped with the goods. Technical information should be ensured to be complete; It is necessary to strictly control the manufacturing length of high-temperature wire and cable, and the delivery length error should be reduced as much as possible. All export products must pass the inspection by the state commodity inspection department and issue a commodity inspection book. With the acceleration of the process of world economic integration, the market competition of domestic high-temperature wire and cable enterprises will not be limited to the domestic market, and the foreign market is the bigger stage. It is hoped that domestic enterprises can carefully consider the above five points before entering the foreign market and make the most suitable development plan according to their own conditions.