How to use copper nose?

The copper nose is a connector used for connecting wires and cables to electrical equipment. The top side is the fixed screw edge, and the end is the copper core of wires and cables after peeling. How to use a copper nose, also known as a wire nose, a copper wiring nose, a copper tube nose, a wiring terminal, etc. , varies from place to place and from industry to industry. It is a connector used for connecting wires and cables to electrical equipment. The top side is the fixed screw edge, and the end is the copper core of wires and cables after peeling. Copper Nose is only used for wires larger than 10 square meters, while copper nose is not used for wires smaller than 10 square meters, and cold wire pressing nose is used instead. The copper nose is divided into surface tin plating and non-tin plating, tube pressure type and oil blocking type. The main scope of application, household appliances, electrical industry, machinery and equipment factory, shipyard, distribution cabinet distribution box, etc. The product has good appearance specifications, good conductivity and safety. Model 1: DT is made of T2 copper rod. The appearance of the product is a spatula round head, which can be used to seal and plug oil. The top side is used to fix screws, the cable inserted into the end after peeling can be pressed tightly with a terminal clamp. Model 2: DTG, which is stamped from T2 copper tube, weighs slightly lighter than DT and can replace DT when sealing and oil blocking connection is not required. The workmanship is simpler and faster than DT, and the price is relatively cheap. There are two kinds of surface treatment commonly used: 1. Pickling, the color of pickling is basically the same as the natural color of red copper, which can play a beautiful anti-oxidation and is more conducive to conductivity. 2. Tinned, the surface of the copper nose after tinned is silvery white, which can better prevent oxidation and conductivity, and can prevent the harmful gas generated by the copper in the conductive process. Installation Precautions: 1. The screws must be tightened. 2. The cable and copper nose must be inserted in place and pressed tightly with pliers. Share: